High Frequency Grid Tie Inverters 1000w

To achieve higher power use requirements, this product can be stacked, such as: 4 grid inverter1000W stacking can achieve 4000W

High Frequency Grid Tie Inverters 1000w  

A.System Function                                         

1,directly connected to the solar panels (do not need to connect the battery)

2,AC 0 angle with high precision auto-detection

   Pure Sine Wave Output

3,Automatic Sensing Function Solar Luminosity

  Power Automatically Locked (APL)

  Maximum Power Point Tracking (MPPT)

  Automatically Adapt To Different Load Power Factor

4,Constant Current, Constant Power

5, Current Limit Protection

6,Stack Multiple Machines

7,High-Frequency High Conversion Rate

B.Specification:

Grid-series models	YTP-1000W
Recommend use solar panels	1250Wp
DC Maximum Input Power	1000W
DC maximum voltage	VpvDC30.2VDC
DC voltage range	Vpv 10.5V~28VDC
Maximum output power factor	99%
Maximum input current	65A
AC output power	1000W
AC maximum output power	1000W
Anti-voltage protection	Fuse
AC standard voltage range	90V-140/180~260VAC
AC frequency range	55Hz~63Hz/ 45Hz-53Hz
Output current total  harmonic distortion	THDIAC <5%
Phase	<1%
Islanding protection	VAC;f AC
Output short circuit protection	Current-limiting
Show	LED
Installation	Wall hanging
Cooling	Fan
Standby Power	<2W
Night Power	<1W
Ambient temperature range	-25 °C~60°C
Humidity	0~99%(Indoor Type Design)
Waterproof	Indoor Type Design
Electromagnetic Compatibility	EN50081.part1   EN50082.part1
Power System Disturbance	EN61000-3-2  EN60950-1
Network test	DIN VDE 1026
N.W	2.0kg(800-1000W)
G.W	2.5kg(800—1000W)
Size (L x W x H)	31 x 16.5 x 5.5cm
Packing (L x W x H)           cm	Inner box: 39 x 20.3 x 11.3 Outer box: 42x31.5x36.5
AC Power Cord	1.8 m

Input and output

1,DC input

* Input voltage range: 10.5V to 28V.

* Solar Panel: recommend the use of power greater than 30W, the standard voltage 17.5V PV panels.

* Recommended, and even solar panels, thread will result in high input voltage inverter which exceeds the working voltage range.

* Wind turbine: Rated voltage 24VDC, maximum voltage 28VDC.

2,AC output: 

* Output 220V AC power inverter can be used in voltage: 170V - 260V, 50 Hz

* Output 110V AC power inverter can be used in voltage range: 90V - 160V, 60 Hz

LED Indicator:

1,Red LED:

* Low-voltage protection (input DC voltage is less than 10.5VDC).

* Overvoltage protection (Input DC voltage is greater than 28.5VDC).

* Over-temperature protection (when the chassis temperature is above 75 °C,

the temperature dropped about 2-10 minutes to restart automatically after cooling).

* Fault Protection (when 110VAC or 220VAC power outage or shutdown).

* Islanding protection: electricity disconnected, the inverter automatically shut down output.

2,Green LED:

* Green LED flashing: are adjusting power output, MPPT is working condition.

* Long bright green LED: Indicates the maximum inverter output power is in the locked state of work.

Notes                                                               

---Non-professionals do not disassemble, Only qualified personnel may repair this product.

---Please inverter installed in the low humidity and well-ventilated place to avoid the inverter

overheating, and clear around the inflammable and explosive materials.

---When using this product, avoid touching children, playing, to avoid electric shock.

---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the

cable size.

---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter

DC voltage drop caused by wear and tear.

---Connected to a power outlet to provide AC.

---Connected solar panels, battery or wind generators DC input DC power supply cable.---Proposed wind power plant with its own charge controller and load dump.

  

High Frequency Grid Tie Inverters 1000w